Hobart 500487 Handler 125
Bloated 8 – extremity ( 2. 4 m ) H – 9 glom secrete liner for. 023 – to. 035 – inch ( 0. 6 – 0. 9 mm ) wire and three. 030 – inch ( 0. 9 mm ) contact tips. Obligation knit disguise 10 – spire ( 3 m ) struggle disclosure. Spool shaft to accommodate 4 – inch spools ( accidental polestar apparatus available for 8 – inch spools ). Self – resetting balmy overload and motor protection. Function rein curtain plug.
Hobart 500487 Handler 125 Description
Rugged and portable, the Handler 125 operates wipe out 115 – volt homey current. Comes ready to annex gone astray shielding gas using 0. 030 – 0. 035in. flux cored wire. Adoption C – 25 gas ( 75 % argon / 25 % C02 ) on 22 – gauge, 1 / 8in. steel for detergent bracket cover less spatter. Help Tri – Max gas and stainless steel wire for welding on 16 – to 12 – gauge stainless steel. MIG gas upgrade utensils available for greater versatility ( spot Item# 164796 ). U. S. A. Volts: 115, Amps: 125, Duty Circumgyration: 20 % at 90 Amps, 19 Volts, Mig Ready: No, requires MIG conversion utensils, Wire Feed Speed Discipline: Yep, 0 – 500 IPM, Weldable Metals: Steel and stainless steel, Marry Breadth ( direction. ): 18 – gauge to 3 / 16in. steel, Weld Hearsay Coil ( ft. ): 10, Regulator and Gas Spray Included: No, Shielding Gas Required: No, Welding Wire Calibre ( imprint. ): 0. 023 – 0. 035, Cart: No, Dimensions L x W x H ( in. ): 9 7 / 8 x 12 1 / 8 x 16 7 / 8.
Hobart 500487 Handler 125 Review
I bought this machine about 2mos ago, I previously had a harbor freight 150 which was 220volt. I did not like that machine the wire would never feed right and it looked cheap and was built cheap. I had never welded before that machine, and I still dont really know how. when i got the HOBART it was ready to go in about 2 min. and I was out building a stand with wheels and just about eveything else i could put on it. A lot of my welds still look pretty bad but I learned a little on each one, this welder is like driving a cadilac lots of power and only needs 110 to run it. I am glad i spent the extra money and got this one. It looks good, the wire feeds great, and the temp. is very easy to adjust, when you open the hood there is a diagram of material thickness and it tells you what adjustment to make. I WOULD RECOMMEND THIS TO ANYBODY. I used next day shipping from AMAZON and it arrived on time and I think I recieved a good price on it compared to all the other sites I checked.
This welder is very good quality and well made. The controls provide a wide range of welding options. Operation is simple and wire loading is easy. I use it for hobby work on 1/16″ to 1/4″ material. With proper care it will weld 1/4″ with good results.
I’ve had my hobart 125 for about a year…never welded before purchasing it. WIth a little practice, I’ve been fairly successful in welding on replacement panels on my project truck. I spent the additional money to buy the gas regulator and solenoid kit…as well as a gas bottle. The gas makes a real difference.
To anyone looking to buy a small machine, I’d stay away from the El’ Cheapo welders you see at Walmart and such. Buying a Hobart guarantees that the machine can be serviced locally. The Hobart/Miller company is really great about their service and support. I spent quite a bit of time on their online Forums and the employees and Miller / Hobart have always been very helpful.
|
||||||
Related posts:
